Wiring

All the wiring necessary for the realization of your arcade project.

4.8mm GPiO Harness for Xinmotek 2 Player Encoder
4.8mm GPiO Harness for Xinmotek 2 Player Encoder
In Stock
Cable for Xinmotek 2-player encoder with 4.8mm lugs for buttons and joysticks.
SCART cable 1.2m
SCART cable 1.2m
In Stock
Male-male SCART cable.
Length 1.2m
2.8mm GPiO harness for Xinmotek 2 Player Encoder
2.8mm GPiO Harness for Xinmotek 2 Player Encoder
In Stock
Cable for Xinmotek 2-player encoder with 2.8mm lugs for buttons and 4.8mm lugs for joysticks.
5-pin joystick adapter to 4.8mm crimp terminal connector
5-pin joystick adapter to 4.8mm lugs
In Stock
This cable will allow you to connect a joystick equipped with a 5-pin connector to 4.8mm lugs.
Useful for a pandora family harness or a jamma harness fitted with 4.8mm lugs.
Length: 20cm.
Micro-HDMI to HDMI cable 3M
Micro-HDMI to HDMI cable 3M
In Stock
Micro-HDMI to HDMI cable
Length : 3 meters
5 pin adapter for joystick with lugs
5 pin adapter for joystick with lugs
In Stock
This cable will allow you to connect a joystick with lugs to a 5 pins cable.
For Zippy, Crown, Seimitsu joysticks.
Jamma cable 6 buttons 150 cm connector
Jamma cable 6 buttons 150 cm - terminals 4.8mm
Last items in stock
Jamma cable. To connect a game PCB in JAMMA format directly to your arcade cab or a Pandora card. 6 buttons. 4.8mm button terminals. Lugs for joystick in 4.8mm. Length: 150cm.
Mini usb cable 1 meter
1M mini usb cable
In Stock
Mini USB cable. To connect / recharge, for example, your PS3 controllers Length 1 meter.
Pandora Box 2.8mm GPiO Cable
Pandora Box 2.8mm GPiO Cable
In Stock
Specific cable for 2 players Pandora Box PCB. Connectors for 2.8mm buttons. 5 pin connectors for joysticks. Connectors for power supply.
LED power harness 5V 12V 6.3mm
Power supply harness LED buttons 5V 12V 6.3mm
In Stock
Cable harness for 5V or 12V LED button power supply 5V: Allows you to connect up to 10 LEDs directly from a USB joystick encoder with the connector provided. 12V: change the connector with 2 fork terminals, for example, to be connected to an arcade power supply. We can make this adaptation for you. In this case, ask us.
6.3mm mass chain - Dupont
Pack
Ground daisy chain 6.3mm lugs - one fork lug connector
In Stock
Common ground chain with fork lug connector for connection to an arcade power supply with terminal block.
For the wiring of the mass of the leds supports of your illuminated buttons.
29 connectors 6.3
1 fork lug connector
2.8mm mass chain - Dupont
Ground daisy chain 2.8mm - Dupont connector
In Stock
Common ground chain with Dupont connector for connection to the GPiO bus of a raspberry Pi. For wiring the earth of buttons and joysticks. 30 connectors 2.8 1 Dupont connector
Weight chain 4.8mm - Dupont
Ground daisy chain 4.8mm - Dupont connector
In Stock
Common ground chain with Dupont connector for connection to the GPiO bus of a raspberry Pi. For wiring the earth of buttons and joysticks. 30 connectors 4.8 1 Dupont connector
Category 6 RJ45 network cable - 5m
Category 6 RJ45 network cable - 5m
In Stock
RJ45 network cable Category 6 5m to connect your arcade cab or bartop to your wired local network
Category 6 RJ45 network cable - 3m
Category 6 RJ45 network cable - 3m
In Stock
RJ45 network cable Category 6 3m to connect your arcade cab or bartop to your wired local network
Category 6 RJ45 network cable - 1m
Category 6 RJ45 network cable - 1m
In Stock
RJ45 network cable Category 6 1m to connect your arcade cab or bartop to your wired local network To make the link between an RJ45 socket on the front and the system (pc or raspberry) inside your arcade cab or bartop
USB 3.0 cable 1.5m
USB 3.0 cable 1.5m
In Stock
USB cable 3 1.5 meters Male Male Perfect for making the link between a front USB socket and the computer inside your arcade cab or bartop
USB 3.0 cable 1m
USB 3.0 cable 1m
In Stock
USB cable 3 1 meter Male Male Perfect for making the link between a front USB socket and the computer inside your arcade cab or bartop
Jack 3.5 Audio Cable 1m
Jack 3.5 Audio Cable 1m
In Stock
Jack 3.5 to Jack 3.5 audio cable To connect the Audio output of your Raspberry Pi to an amplifier for example Length: 1m
1.8m HDMI cable
1.8m HDMI cable
In Stock
HDMI 2.0 cable 1.8m