List of products by supplier Retroflag

Faithfully reproduces the design of the Gameboy. Color screen Compatible with Raspberry Pi Zero / Zero W Incompatible Pi Zero WH (because of the Gpio connector) Batteries: 3xAA Dimensions: 135x81x32mm Contents : SuperPi Case U Manual Screwdriver

USB wired controller. Compatible with any Windows, Linux on USB port. Exactly reproduces the controller of the Megadrive console. Very good quality.

Faithfully reproduces the design of the Megadrivre. Secure reset and shutdown function so as not to corrupt the SD card. Complete Raspberry connectivity accessible from the box, without having to disassemble anything. Cartridge slot for storing micro-SD cards Possible addition of a 30x30mm fan Compatible with Raspberry Pi 3 / 3b + / 2b Dimensions: 120x91x35mm Contents: Megapi box Manual Screwdriver

Raspberry Pi 4 compatible revision!
The cartridge can accommodate an SSD in order to have a comfortable amount of storage!
Faithfully reproduces the design of the original NES.
Secure reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the box, without having to disassemble anything.
Dimensions: 143.37x114.65x53.7mm.
Contents:

Nespi housing 4.
Manual.
Fan.
Screwdriver, screws and heat sink.

Faithfully reproduces the design of the original NES.
Secure reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the box, without having to disassemble anything.
Compatible with Raspberry Pi 3 / b + / 2
Dimensions: 92x80x39mm
Contents:

Nespi housing
Manual
Screwdriver

Last enclosure from Retroflag adding the mythical playstation to the catalog.
Safe reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the case, without the need to disassemble anything.
CD cover that opens leaving room for storage space for SD cards.
Compatible with the Raspberry Pi 4 only.
Dimensions: 134.7x94.5x38.7mm

Contents :

PiStation case
Manual
Screwdriver

Version of the PiStation equipped with a 4.3 inch LCD screen with a definition of 840 x 480 pixels. This case therefore allows you to play retro games directly without connecting to a television ! Mains power is always required, there is no battery.
The LCD module is simply attached to the back of the PiStation box using 2 screws. The screen folds back on the case.
Safe reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the case, without the need to disassemble anything.
CD cover that opens leaving room for storage space for SD cards.
Compatible with the Raspberry Pi 4 only.
Dimensions: 134.7x94.5x38.7mm.

Contents :
Damaged packaging but new product, intact, never used. 

PiStation case
LCD screen module
Manual
Screwdriver

USB wired controller. Compatible with any Windows, Linux on USB port. Reproduces exactly the controller of the SNES console USA version. Very good quality.

USB wired controller. Compatible with any Windows, Linux on USB port. Exactly replicates the controller of the SNES console. Very good quality.

Faithfully reproduces the design of the Japanese and European SNES.
Secure reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the box, without having to disassemble anything.
Cartridge slot to store micro-SD cards or to insert a dummy cartridge to give the appearance of a real console with inserted cartridge.
Compatible with Raspberry Pi 4 only.
Dimensions: 110x133x39mm
Contents:

SuperPi 4 Case
Manual
Screwdriver

Faithfully reproduces the design of the Japanese and European SNES. Secure reset and shutdown function so as not to corrupt the SD card. Complete Raspberry connectivity accessible from the box, without having to disassemble anything. Cartridge slot to store micro-SD cards or to insert a dummy cartridge to give the appearance of a real console with inserted cartridge. Compatible with Raspberry Pi 3 / 3b + / 2b Dimensions: 110x133x39mm Contents: SuperPi Case J Manual Screwdriver

Faithfully reproduces the design of the American SNES.
Secure reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the box, without having to disassemble anything.
Cartridge slot to store micro-SD cards or to insert a dummy cartridge to give the appearance of a real console with inserted cartridge.
Compatible with Raspberry Pi 3 / 3b + / 2b
Dimensions: 112x135x42mm
Contents:

SuperPi Case U
Manual
Screwdriver