€18.90
Peripheral devices
All peripherals needed for retrogaming.
There are 21 products.
Active filters
- Brand: Générique (Asie) clear
4.8mm GPiO Harness for Xinmotek 2 Player Encoder
In Stock
Cable for Xinmotek 2-player encoder with 4.8mm lugs for buttons and joysticks.
€9.90
€4.90
2.8mm GPiO Harness for Xinmotek 2 Player Encoder
In Stock
Cable for Xinmotek 2-player encoder with 2.8mm lugs for buttons and 4.8mm lugs for joysticks.
€9.90
48 cm micro-sd extension
In Stock
Extension for micro-sd reader. Perfect for deporting the micro sd port of your raspberry pi or pandora box card; this extension will prevent you from dismantling your arcade cab each time. Flexible tablecloth. Compatible with all card capacities. Do not plug in when the equipment is powered on. Length: 48 cm.
€6.49
Micro-SD extension 25 cm
In Stock
Extension for micro-sd reader.
Perfect for deporting the micro sd port of your raspberry pi or pandora box card; this extension will prevent you from dismantling your arcade cab each time.
Flexible tablecloth.
Compatible with all card capacities.
Do not plug in when the equipment is powered on.
Length: 25 cm.
Perfect for deporting the micro sd port of your raspberry pi or pandora box card; this extension will prevent you from dismantling your arcade cab each time.
Flexible tablecloth.
Compatible with all card capacities.
Do not plug in when the equipment is powered on.
Length: 25 cm.
€4.99
2.1 x 5.5mm female jack connector
In Stock
Power connector jack to screw 2.1 x 5.5mm. Socket. The electric cables are to be connected using the screw terminal block. The + and the - are marked.
€1.30
2.1 x 5.5mm male jack connector
In Stock
Power connector jack to screw 2.1 x 5.5mm. Male plug. The electric cables are to be connected using the screw terminal block. The + and the - are marked.
€1.30
Plastic case for Raspberry Pi - Black
In Stock
Plastic case for Raspberry Pi . The low-cost case to protect your nano computer. Dimensions: 90x68x25mm Black color. Compatible with : Raspberry Pi B + Raspberry Pi 2 Raspberry Pi 3 Raspberry Pi 3B +
€5.50
Modular case for Raspberry Pi - Transparent
Last items in stock
ABS plastic case with removable cover to allow the mounting of expansion cards such as cameras or heat sinks. The feet are made of rubber. Dimensions: 94x63x30mm. Compatible with : Raspberry Pi + Raspberry Pi 2 Raspberry Pi 3 Raspberry Pi 3b +
€7.90
Modular case for Raspberry Pi - Black
Last items in stock
ABS plastic case with removable cover to allow the mounting of expansion cards such as cameras or heat sinks. The feet are made of rubber. Dimensions: 94x63x30mm. Compatible with : Raspberry Pi + Raspberry Pi 2 Raspberry Pi 3 Raspberry Pi 3b +
€7.90
€6.49
SATA to USB 3 Adapter
In Stock
SATA to USB 3 Adapter To connect a 2.5 inch mechanical hard drive or SSD directly to a usb port Cable length 26.5cm
€8.90
USB-C to USB 3 adapter
In Stock
USB-C to USB 3 adapter To connect a USB-C device using a standard USB cable
€4.00
Mini-HDMI to HDMI Adapter
In Stock
Mini-HDMI to HDMI Adapter To connect a device with Mini-HDMI output using a standard HDMI cable
€3.49
Micro-HDMI to HDMI adapter
In Stock
Micro-HDMI to HDMI adapter To connect a device with Micro-HDMI output using a standard HDMI cable
€3.49
Micro-HDMI VGA converter with audio
In Stock
To convert an HDMI signal to VGA with audio signal recovery on 3.5mm jack. Maximum resolution supported: Full HD 1080p. Ideal for Raspberry Pi 4b. Audio cable length: 40cm
€12.90
HDMI VGA converter with audio
In Stock
To convert an HDMI signal to VGA with audio signal recovery on 3.5mm jack. Maximum resolution supported: Full HD 1080p. Ideal for Raspberry Pi b + to 3b + Audio cable length: 40cm.
€9.90
1 player zero delay USB encoder - 2.8mm connectors
In Stock
1 player USB encoder To connect the buttons and joystick via a usb cable on a pc or raspberry pi Possibility to connect up to 12 buttons Dimensions: 85x35x10mm Delivered with : Encoder card 1.8m USB cable 10 cables for 2.8 buttons. Cable length 22cm. 1 cable 5 pins (JST-XH) for joystick, length 20cm
€9.90
1 player zero delay USB encoder - 4.8mm connectors
In Stock
1 player USB encoder. To connect the buttons and joystick via a usb cable on a pc or raspberry pi. Possibility to connect up to 12 buttons. Dimensions: 85x35x10mm. Delivered with : Encoder card 1.8m USB cable 14 4.8mm lug cables: 10 for buttons and 4 for joystick. Cable length 20cm. 4.8mm lugs are also suitable for buttons equipped with switches with 2.8mm lugs.
€9.90