Peripheral devices

All peripherals needed for retrogaming.

Subcategories

Adapters

Video adapters, network

Enclosures

Cases for Raspberry, reproducing the most famous video game consoles.

Micro-sd cards

Micro-sd cards

Converters

Audio / Video converters or converters for joysticks (use your joysticks and arcade stick on other consoles or PC).

Encoders

USB joystick encoders

Monitors

Refurbished 4/3 or 5/4 format monitors. Ideal size for arcade and retro consoles.

Small Board Computers

Small Board Computers.

Nano or mini computers such as raspberry pi or Odroid cards from Hardkernel.

4.8mm GPiO Harness for Xinmotek 2 Player Encoder
-15%
4.8mm GPiO Harness for Xinmotek 2 Player Encoder
In Stock
Cable for Xinmotek 2-player encoder with 4.8mm lugs for buttons and joysticks.
SCART cable 1.2m
-15%
SCART cable 1.2m
In Stock
Male-male SCART cable.
Length 1.2m
Pi2Jamma V2 Premium
-15%
Pi2Jamma V2 Premium
In Stock
The Pi2Jamma V2 Premium card will allow you to connect your raspberry Pi 3 or 4 directly to the JAMMA comb of your terminal. No other adapter/converter is needed.
The supplied audio cable allows the recovery of sound on the raspberry pi.
See detailed features below.
Official documentation: http://pi2jamma.info/
Test video: https://www.youtube.com/watch?v=QG-UqHmfZak
€110.42
€129.90
Pi2Scart - Raspberry Pi
-15%
Pi2Scart - Raspberry Pi
In Stock
The Pi2Scart board allows you to connect your raspberry pi 3 or 4 to a CRT television via a scart socket (SCART) and thus enjoy a 15Khz video mode!
Connects directly to the GPiO port of the raspberry pi. No power supply required.
The 3.5mm jack audio input allows you to recover the sound from the raspberry pi jack output (cable supplied) and inject it into the scart socket.
Package content:

Pi2Scart PCB
3.5mm male-to-male jack audio cable
2 PCB supports for holding the card

To implement the 15Khz video output, you will need to configure your distribution (resolution and frequency). We advise you to use Recalbox 8 which has a CRT mode compatible with this product : Recalbox CRT setup.
Official product documentation: http://pi2jamma.info/
€33.92
€39.90
Retroflag PiStation Case
-15%
Retroflag PiStation Case
In Stock
Last enclosure from Retroflag adding the mythical playstation to the catalog.
Safe reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the case, without the need to disassemble anything.
CD cover that opens leaving room for storage space for SD cards.
Compatible with the Raspberry Pi 4 only.
Dimensions: 134.7x94.5x38.7mm

Contents :

PiStation case
Manual
Screwdriver
€25.42
€29.90
Retroflag SuperPi 4 Case
-15%
Retroflag SuperPi 4 Case
In Stock
Faithfully reproduces the design of the Japanese and European SNES.
Secure reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the box, without having to disassemble anything.
Cartridge slot to store micro-SD cards or to insert a dummy cartridge to give the appearance of a real console with inserted cartridge.
Compatible with Raspberry Pi 4 only.
Dimensions: 110x133x39mm
Contents:

SuperPi 4 Case
Manual
Screwdriver
€25.42
€29.90
2.8mm GPiO harness for Xinmotek 2 Player Encoder
-15%
2.8mm GPiO Harness for Xinmotek 2 Player Encoder
In Stock
Cable for Xinmotek 2-player encoder with 2.8mm lugs for buttons and 4.8mm lugs for joysticks.
N64 enclosure for Odroïd XU4 board
-30%
N64 enclosure for Odroïd XU4 board
In Stock
Odroid game station enclosure based on the design of the N64. Designed to receive an Odroid XU4 or XU4Q small board computer from Hardkernel.
The box has a programmable 2.4-inch LCD screen on the front, 4 USB ports and two front buttons (power switch and programmable switch).
It can accommodate an internal 2.5-inch hard drive for additional storage (you will then need a SATA/USB adapter to connect it to the XU4 board).
Dimensions: 180 x 65 x 150mm.
wiki manufacturer : https://wiki.odroid.com/odroid-xu4/software/ogst_console_kit
€27.93
€39.90
Dongle WIFI + Bluetooth 5B for Odroïd
-15%
Dongle WIFI + Bluetooth 5B for Odroïd
In Stock
Dongle Wifi and Bluetooth for Odroïd. Revision 5B. Compatible with all Odroïd boards.
Chipset Realtek RTL8821CU.
802.11 ac/abgn, 802.11ac 1x1, Wave-2 MU-MIMO compatible.
Bluetooth 4.2 (not BLE).
€10.97
€12.90
Aluminium enclosure for Odroid Go Super - black
-40%
Aluminium enclosure for Odroid Go Super - black
In Stock
Aluminum case for Odroid Go Super console.
Supplied with aluminum buttons, 5000mAh battery, suitable screws.
€53.94
€89.90
Screen DELL 19 Inch - Format 5/4 - GRADE A
-15%
17 Inch DELL Screen - 5/4 Format - GRADE A
In Stock
17 inch DELL screen. Reconditioned grade A: Panel without any pixel or brightness defect. Front face may show slight signs of use. Back side showing signs of use or scratches. 5/4 format ideal for arcade and retrogaming. TN panel. Max resolution: 1280x1024. Dimensions: 309.25 mm x 372.10 mm x 59.20 mm. References may vary depending on arrival: P170SB - P170ST. 6 month warranty. CAUTION: screen stand not delivered and not available.
€50.92
€59.90
Brook Wingman NS converter
-15%
Brook Wingman NS converter
In Stock
Brook Super converter Wingman XB.
Use your PS3, PS4, PS5, Xbox (Elite, 360, One, Serie X, Serie S), Sega Astro city mini, Megadrive mini, Switch Pro controllers on Switch or PC (X-input).
€38.17
€44.90
Sandisk Ultra Micro-SD Memory Card - 512 Gb
-15%
Sandisk Ultra Micro-SD Memory Card - 512 Gb
In Stock
Large capacity Sandisk Ultra Micro-SD memory card. Raw capacity: 512 Gb. Class 10 A1, speed 100mbs. One of the world's best brands in storage. Choose the Sandisk brand to benefit from the best effective storage capacity (closest to the gross capacity advertised).
€84.92
€99.90
Odroid H2 / H2 + box
-15%
Odroid H2 / H2 + box
Last items in stock
Box for Odroid H2 / H2 + type 2. Compatible storage: Integrated eMMC 5.1 module, NVMe M.2. No SATA storage device can be installed in this enclosure. The disk drive mounting screws (M3x6mm) are included in the package. The power and reset switches are accessible through the hole in the front. Dimensions: 128x132x63mm.
€16.92
€19.90
Adapter for EMMC Odroid storage module
-15%
Adapter for EMMC Odroid storage module
Last items in stock
USB 3.0 adapter for reading / writing and flashing EMMC storage modules for Odroid.
Works with EMMC ODROID Orange, Red and Blue modules.
Not compatible with Black EMMC modules.
We recommend that you use Win32DiskImager or Etcher software.
€11.82
€13.90
Micro-SD extension 25 cm
-15%
Micro-SD extension 25 cm
In Stock
Extension for micro-sd reader. Perfect for deporting the micro sd port of your raspberry pi or pandora box card; this extension will prevent you from dismantling your arcade cab each time. Flexible tablecloth. Compatible with all card capacities. Do not plug in when the equipment is powered on. Length: 25 cm.
2.1 x 5.5mm female jack connector
-15%
2.1 x 5.5mm female jack connector
In Stock
Power connector jack to screw 2.1 x 5.5mm. Socket. The electric cables are to be connected using the screw terminal block. The + and the - are marked.
2.1 x 5.5mm male jack connector
-15%
2.1 x 5.5mm male jack connector
In Stock
Power connector jack to screw 2.1 x 5.5mm. Male plug. The electric cables are to be connected using the screw terminal block. The + and the - are marked.
2.5 x 5.5mm female jack connector
-15%
2.5 x 5.5mm female jack connector
In Stock
Power connector jack to screw 2.5 x 5.5mm.
Socket.
The electric cables are to be connected using the screw terminal block. The + and the - are marked.
2.5 x 5.5mm male jack connector
-15%
2.5 x 5.5mm male jack connector
In Stock
Power connector jack to screw 2.5 x 5.5mm. Male plug. The electric cables are to be connected using the screw terminal block. The + and the - are marked.