Nano computer or Small Board Computer (SBC).

Take it up a notch with this X86 architecture nano computer and easily emulate all consoles up to WII.

Supplied without RAM (DDR4) or storage (2 SATA ports, 1 EMMC port, 1 NVME port).

AT	CPU (Intel Celeron J4115 Processor)	K	1 x DisplayPort 1.2
B	2 x DDR4 SO-DIMM slots (Dual channel memory support)	L	2 x RJ45 Ethernet Ports (10/100/1000/2500)
VS	1 x M.2 PCI Express Module Socket (NGFF-2280)	M	5 x System LED Indicators
D	1 x eMMC (Embedded Multimedia-Card) Socket	NOT	1 x Peripheral Expansion Header (24-pin)
E	2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible)	O	1 x Power Switch
F	2 x SATA3 6.0 Gb / s Data Connectors	P	1 x Reset Switch
G	1 x DC Power Jack	Q	1 x Backup Battery Connector (2-pin)
H	2 x USB 3.0	R	1 x Active Cooling Fan Connector (4-pin)
I	2 x USB 2.0	S	1 x Audio out 1 x Audio in 1 x SPDIF out
J	1 x HDMI 2.0	S	1 x Audio out 1 x Audio in 1 x SPDIF out

8 other products in the same category:

€33.25

€10.75

€83.25

€74.92

€70.75

€14.92

€62.42

€33.25

	HDMI 2.0 cable 1 meter	HDMI cable 1m €2.91
	HDMI 2.0 cable 1.8m	1.8m HDMI cable €4.13
	To convert an HDMI signal to VGA with audio signal recovery on 3.5mm jack. Maximum resolution supported: Full HD 1080p. Ideal for Raspberry Pi b + to 3b + Audio cable length: 40cm.	HDMI VGA converter with audio €8.25

	EMMC module with a capacity of 32Gb for installing your systems on Odroid N2 / N2 + or H2 / H2 +. Emmc V5 modules have better performance than conventional micro-sd cards with respectively 250 mb / s in reading and 180 mb / s in writing. Needs to be flashed with linux or android depending on the Odroid model used. The images are available on the manufacturer's website Hardkernel (wiki).	EMMC 32Gb module for Odroid N2 / N2 + or H2 / H2 + €31.58
	EMMC module with a capacity of 64Gb for installing your systems on Odroid N2 / N2 + or H2 / H2 +. Emmc V5 modules have better performance than conventional micro-sd cards with respectively 250 mb / s in reading and 180 mb / s in writing. Needs to be flashed with linux or android depending on the Odroid model used. The images are available on the manufacturer's website Hardkernel (wiki).	64Gb EMMC module for Odroid N2 / N2 + or H2 / H2 + €49.92
	EMMC module with a capacity of 128Gb for installing your systems on Odroid N2 / N2 + or H2 / H2 +. Emmc V5 modules have better performance than conventional micro-sd cards with respectively 250 mb / s in reading and 180 mb / s in writing. Needs to be flashed with linux or android depending on the Odroid model used. The images are available on the manufacturer's website Hardkernel (wiki).	128Gb EMMC module for Odroid N2 / N2 + or H2 / H2 + €58.25
		None

	Box for Odroid H2 / H2 + type 2. Compatible storage: Integrated eMMC 5.1 module, NVMe M.2. No SATA storage device can be installed in this enclosure. The disk drive mounting screws (M3x6mm) are included in the package. The power and reset switches are accessible through the hole in the front. Dimensions: 128x132x63mm.	Odroid H2 / H2 + box €16.58
	Regulated fan for Odroid N2 +. Supplied with 4 fixing screws. Dimensions: 92x92x25mm.	92mm Odroid H2 + fan €8.25

	Service provision Assembly / Hardware assembly Assembly of spare parts for the equipment packs for sale on the site	Hardware assembly €16.58
	Installation service of a system on a micro-s card for sale on the site Can't flash the system you want to a micro-sd card or just don't know how to do it? We offer you the preparation of your micro-sd card with the system of your choice. Insert, switch on and start using your retrogaming console or arcade machine	SD card system installation €12.42

Odroid H2 +

	15V 4A power supply for Odroid H2 Plus or other equipment requiring 15V. Jack 2.1 x 5.5mm connector.	15V 4A power supply for Odroid H2 €14.08
		None