Last enclosure from Retroflag adding the mythical playstation to the catalog.
Safe reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the case, without the need to disassemble anything.
CD cover that opens leaving room for storage space for SD cards.
Compatible with the Raspberry Pi 4 only.
Dimensions: 134.7x94.5x38.7mm
Faithfully reproduces the design of the Japanese and European SNES.
Secure reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the box, without having to disassemble anything.
Cartridge slot to store micro-SD cards or to insert a dummy cartridge to give the appearance of a real console with inserted cartridge.
Compatible with Raspberry Pi 4 only.
Dimensions: 110x133x39mm
Contents:
Odroid game station enclosure based on the design of the N64. Designed to receive an Odroid XU4 or XU4Q small board computer from Hardkernel.
The box has a programmable 2.4-inch LCD screen on the front, 4 USB ports and two front buttons (power switch and programmable switch).
It can accommodate an internal 2.5-inch hard drive for additional storage (you will then need a SATA/USB adapter to connect it to the XU4 board).
Dimensions: 180 x 65 x 150mm.
wiki manufacturer : https://wiki.odroid.com/odroid-xu4/software/ogst_console_kit
Box for Odroid H2 / H2 + type 2. Compatible storage: Integrated eMMC 5.1 module, NVMe M.2. No SATA storage device can be installed in this enclosure. The disk drive mounting screws (M3x6mm) are included in the package. The power and reset switches are accessible through the hole in the front. Dimensions: 128x132x63mm.
Fancy a real metal case for your Odroïd Go Advance BLACK EDITION? Opt for this model in green aluminum. Perfectly adapted, it will perfectly replace the original plastic case. Supplied with a set of suitable screws and rubber shims. WARNING: not compatible with the Odroid Go Advance 1.0.
Raspberry Pi 4 compatible revision!
The cartridge can accommodate an SSD in order to have a comfortable amount of storage!
Faithfully reproduces the design of the original NES.
Secure reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the box, without having to disassemble anything.
Dimensions: 143.37x114.65x53.7mm.
Contents:
Nespi housing 4.
Manual.
Fan.
Screwdriver, screws and heat sink.
Plastic case for Raspberry Pi . The low-cost case to protect your nano computer. Dimensions: 90x68x25mm Black color. Compatible with : Raspberry Pi B + Raspberry Pi 2 Raspberry Pi 3 Raspberry Pi 3B +
ABS plastic case with removable cover to allow the mounting of expansion cards such as cameras or heat sinks. The feet are made of rubber. Dimensions: 94x63x30mm. Compatible with : Raspberry Pi + Raspberry Pi 2 Raspberry Pi 3 Raspberry Pi 3b +
ABS plastic case with removable cover to allow the mounting of expansion cards such as cameras or heat sinks. The feet are made of rubber. Dimensions: 94x63x30mm. Compatible with : Raspberry Pi + Raspberry Pi 2 Raspberry Pi 3 Raspberry Pi 3b +
Aluminum case for Raspberry Pi 4. Ideal for building your own compact retro console. Basic passive cooling, you can activate the fan installed inside the box to control the fan speed by software in order to adapt the speed to the heating and reduce noise. Remote connections at the back of the box and on / off button that can be controlled by software in order to be able to shut down your Raspberry Pi in complete safety (safe shutdown). The GPiO port can be accessed by removing the magnetically locked cover. Dimensions: 95x72x28mm.
Polished aluminum case, space gray color, suitable for Raspberry Pi 4. Passive cooling. The cover slides to give you access to the connections and GPiO of the Rapberry. The closure is magnetic. Dimensions: 95.3x71.5x27.5mm.
Faithfully reproduces the design of the American SNES.
Secure reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the box, without having to disassemble anything.
Cartridge slot to store micro-SD cards or to insert a dummy cartridge to give the appearance of a real console with inserted cartridge.
Compatible with Raspberry Pi 3 / 3b + / 2b
Dimensions: 112x135x42mm
Contents:
Faithfully reproduces the design of the original NES.
Secure reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the box, without having to disassemble anything.
Compatible with Raspberry Pi 3 / b + / 2
Dimensions: 92x80x39mm
Contents:
Version of the PiStation equipped with a 4.3 inch LCD screen with a definition of 840 x 480 pixels. This case therefore allows you to play retro games directly without connecting to a television ! Mains power is always required, there is no battery.
The LCD module is simply attached to the back of the PiStation box using 2 screws. The screen folds back on the case.
Safe reset and shutdown function so as not to corrupt the SD card.
Complete Raspberry connectivity accessible from the case, without the need to disassemble anything.
CD cover that opens leaving room for storage space for SD cards.
Compatible with the Raspberry Pi 4 only.
Dimensions: 134.7x94.5x38.7mm.
Contents :
Damaged packaging but new product, intact, never used.
PiStation case
LCD screen module
Manual
Screwdriver
Aluminum case for anbernic RG280V.
Requires no soldering. You will have to be very careful when removing the screen from the plastic case of your console.
Supplied with suitable screws.
Aluminum case for anbernic RG280V.
Requires no soldering. You will have to be very careful when removing the screen from the plastic case of your console.
Supplied with suitable screws.
More compact version of the One Zero KUMA, the BAMBI has the particularity of having the bevelled front face.
The ideal box for the creation of your DIY HITBOX.
A very simple design but a robust and successful design.
Add the buttons of your choice in 24 and 30mm to clip or screw from sanwa or seimitsu and a fighting board, you will get what is best!
Removable acrylic cover to be able to insert the artwork of your choice!
More compact version of the One Zero KUMA, the BAMBI has the particularity of having the bevelled front face.
The ideal box for the creation of your DIY HITBOX.
A very simple design but a robust and successful design.
Add the buttons of your choice in 24 and 30mm to clip or screw from sanwa or seimitsu and a fighting board, you will get what is best!
Removable acrylic cover to be able to insert the artwork of your choice!
Dear customers, dear enthusiasts, After 3 years of activity, new projects call us.
So we made the decision to hand over.
After months of discussions, we have finally found the passionate and sufficiently motivated person to continue our activity while preserving the values that characterize us: wide choice of products, seriousness, advice, quality after-sales service/maintenance. All out-of-stock products will be back in stock! Well, some would say.... :-) Also all the news you've been waiting for.
The time of the transfer of activity and stocks, orders will be suspended.
Orders in progress will be delivered normally.
For any question or request, you can write to the address: contact.arcadiaretrogaming@gmail.com
Thank you for your trust during these 3 years! David
