Arcade

All the parts necessary for the realization of an arcade machine.

Subcategories

Buttons

Arcade buttons to screw, clip, transparent, silver, screen-printed ...

Restrictors

Joysticks restrictors 4/8 ways, octagonal, standard or round.

Joysticks

Japanese, American or illuminated arcade joysticks.

Coin acceptors

Simple coin mechanism, with door or electronic comparison.

PCB

Arcade Game Cartridges, Pandora Box Cards or PCBs.

Handles

Handles for round, oval joysticks, metallic look, transparent. Generic or brand name Sanwa, Seimitsu .

Doors

Doors for coin mechanism or cash register

Shaft / Dust covers

Joystick shaft protectors, joystick dust protection.

Shafts

Replacement joystick shafts or for changing the original length.

Trackballs

Trackball for specific games like breakouts.

T-molding

T-molding for dressing the edges of arcade or bartop machines.

5-pin joystick adapter to 4.8mm crimp terminal connector
New product
5-pin joystick adapter to 4.8mm lugs
In Stock
This cable will allow you to connect a joystick equipped with a 5-pin connector to 4.8mm lugs.
Useful for a pandora family harness or a jamma harness fitted with 4.8mm lugs.
Length: 20cm.
T-molding 16mm High Quality - Chrome
New product
T-molding 16mm High Quality - Chrome
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 16mm, width of the spine: 2.7mm.
Provide a 2mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 16mm High Quality - Bright red
New product
T-molding 16mm High Quality - Bright red
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 16mm, width of the spine: 2.7mm.
Provide a 2mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 16mm High Quality - Bright blue
New product
T-molding 16mm High Quality - Bright blue
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 16mm, width of the spine: 2.7mm.
Provide a 2mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 16mm High Quality - Bright green
New product
T-molding 16mm High Quality - Bright green
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 16mm, width of the spine: 2.7mm.
Provide a 2mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 16mm High Quality - Black
New product
T-molding 16mm High Quality - Black
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 16mm, width of the spine: 2.7mm.
Provide a 2mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Red
New product
T-molding 19mm High Quality - Red
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Orange
New product
T-molding 19mm High Quality - Orange
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Gold
New product
T-molding 19mm High Quality - Gold
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Chrome
New product
T-molding 19mm High Quality - Chrome
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Bright Green (Galaxian)
New product
T-molding 19mm High Quality - Bright Green (Galaxian)
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Bright blue (Galaxian)
New product
T-molding 19mm High Quality - Bright blue (Galaxian)
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Green
New product
T-molding 19mm High Quality - Green
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Blue
New product
T-molding 19mm High Quality - Blue
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Yellow
New product
T-molding 19mm High Quality - Yellow
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Bright red
New product
T-molding 19mm High Quality - Bright red
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.
T-molding 19mm High Quality - Black
New product
T-molding 19mm High Quality - Black
In Stock
T-molding is the decorative trim to insert on the outer edge of facades of your arcade cab, bartop, cocktail table or pincab.
Made in the USA, this T-molding has better flexibility than Asian T-molding. It supports torsions better. Its 7.5mm long spine is also an advantage.
Width 19mm, width of the spine: 2.4mm.
Provide a 1.6mm slot for installation.
The price is given by the meter. The total length ordered will be sent to you in one piece.

Seimitsu LB-35BM Balltop - Yellow
New product
Seimitsu LB-35BM Balltop - Yellow
In Stock
Seimitsu LB-35BM Limited Edition joystick handle.
Unique marble effect obtained with the application of 4 coats of colored acrylic resin. Result: the pattern obtained is unique for each handle.
It can be mounted on any joystick with a standard 6mm thread.

Seimitsu LB-35BM Balltop - Violet
New product
Seimitsu LB-35BM Balltop - Violet
In Stock
Seimitsu LB-35BM Limited Edition joystick handle.
Unique marble effect obtained with the application of 4 coats of colored acrylic resin. Result: the pattern obtained is unique for each handle.
It can be mounted on any joystick with a standard 6mm thread.

Seimitsu LB-35BM Balltop - Green
New product
Seimitsu LB-35BM Balltop - Green
In Stock
Seimitsu LB-35BM Limited Edition joystick handle.
Unique marble effect obtained with the application of 4 coats of colored acrylic resin. Result: the pattern obtained is unique for each handle.
It can be mounted on any joystick with a standard 6mm thread.